阐述了矩形磁极线圈弯曲半径对弯角部位形状尺寸的影响。

The influence of bend radius inside the rectangle pole coil against dimension of the bend corner part is discussed.

该EA1400N机器人的空心上臂保持这焊枪电缆的最佳弯曲半径，以最大限度地提高焊接性能和延长缆线的使用期限。

The EA1400N's hollow upper arm maintains the optimum bend radius of the welding torch cable, maximizing weld performance and extending cable life.

弯曲半径：电缆弯曲半径不低于电缆外径的6倍。

Bending radius of cable shall be no less than 6 times that of cable outer diameter.

模具采用T形滑座与弯曲角两边的压板调节，从而达到在一定范围内调节弯曲角度的目的，弯曲半径的调节主要是通过更换弯曲半径的调节轴来实现。

In order to adjust the bending angle, the T type slide seat and bending press plate were used. The adjusting of bending radius was implemented by replacing the adjusting axis of bending radius.

此外，可通过改变销轴获得改变弯曲半径。

In addition, by changing pin shaft gain change bending radius.

电缆最小弯曲半径为电缆外径的15倍.

The minimum bending radius should be 15 times of the outer diameter.

产品的最小弯曲半径为电缆直径的25倍.

The minimum bending radius is 25 times of the diameter of the cable.

弯曲半径：电缆弯曲半径不低于电缆外径的15倍。

Bending radium of cable shall be no less than 15 times that of cable outer diameter.

电缆弯曲半径：不小于电缆外径的6倍。

The bending radius should not less than 6 times of cable diameter.

电缆弯曲半径:不小于电缆外径的25倍.

The bending radius should not be less than 25 times of the cable diameter.