It's used for the production of large castings.

它用于大型铸件的制备。

It is of all fabricated construction with no castings use.

这是所有编造的建设没有铸件使用。

It is of all fabricated construction with no castings used in it.

这是所有编造的建设与没有使用的铸件。

This can make complex shaped castings without any draft or flash.

它能制造没有拔模斜度和缝脊的复杂形状铸件。

Zinc base die castings are always copper plated in cyanide baths.

锌基合金的压铸件总是在氰化镀液中镀铜。

The aluminum wheel castings were pretty rough and hard to work with.

该铝合金轮毂铸件的人相当粗糙和努力的工作。

The strength and ductility of forgings are better than that of castings.

锻件的强度、塑性和韧性优于铸件。

Aluminium and aluminium alloys - scrap - Part 7: scrap consisting of castings.

铝和铝合金。废料。第7部分：铸件组成的废料。

Machine tool castings have rather complicated strucfures and require high qualies.

机床铸件结构比较复杂，质量要求高。

To argue the distance between mold end and castings, the wax pattern block was set.

为增大模头与铸件的距离，常用垫蜡块的方法。

Position, secure, measure and work metal stock or castings to lay out for machining.

放置，保护，测量和操作金属库存或铸件为加工奠定基础。

This is the final medal that was produced using the castings in the previous images.

这是最后的金牌是用在制作上图像的铸件。

Cold shuts and Cracks are the common defects found in thin-shell grey-iron castings.

冷隔、裂纹是薄壳灰铸铁件常见缺陷。

Both the chill and reverse chill are defects often found in the nodular iron knucle castings.

白口和反白口缺陷是球铁件转向节的常见缺陷。

The Rubber Machine of WELLTECis made of the as cast SG iron castings produced by our company.

采用我公司铸态球墨铸铁件生产的华大橡胶机。

It can give lead times of one or two weeks, instead of two months or more that would be needed for castings.

无需2个月或更长的时间来进行铸造和加工，只用1到2周便可完成。

Over the PAST half century, Ivan Karp has fretted over the carvings and castings behind the Brooklyn Museum.

在过去的整整半个世纪里，伊万·卡普都在为布鲁克林博物馆里的雕刻和铸像揪心。

In castings, hardness can be achieved at ambient conditions if the part remains at rest for a period of time.

铸件，硬度，才能实现在环境条件下进行，如果部分仍然是休息一段时间。

Iron castings maker Donsco, on the Banks of the Susquehanna River in eastern Pennsylvania, illustrates the dilemma.

位于宾夕法尼亚东部萨斯奎哈纳河岸上的铸铁生产商登斯科举例说明了这种困境。

The technology of numerical simulation on filling process of castings is a frontal technology in the casting field.

铸造充型过程的数值模拟技术是铸造领域的前沿技术。

Core construction components (or inserts) may include wheel hubs, bearings, fasteners, injection-molded parts or castings.

滚轮产品的核心组成部分包括轮毂，轴承，紧固件或铸件。

And the shrinkage porosity distribution in the castings and the mechanical properties of the castings were also researched.

研究了铸件中的缩松和铸件力学性能分布特点。

Castings and forgings and hydrogen brittleness sensitivity to the spare parts of the appropriate USES weak acid galvanizing.

铸锻件和对氢脆敏感的零件宜用弱酸性镀锌液。

The compound mold manufacturing and application example suitable for large thin-walled complicated Al-alloy castings were described.

以大型、薄壁、复杂铝合金铸件为对象，叙述了复合铸型的制造和应用范例。

Objective the purpose of this study was to observe the effect on marginal seating of the castings with and without ring investments.

目的观察无圈包埋和有圈包埋对铸件边缘适合性的影响。

Parts made with investment castings often do not require any further machining, because of the close tolerances that can be achieved.

采用熔模铸造的零件常常不需要进一步加工，因为熔模铸造能达到精密的公差。