The results indicate that the wear properties are influenced by load, glide velocity and rigidity, and the main wear mechanism is adherence wear and abrasive wear.

结果表明，无论是试验过程中的载荷、滑动速度，还是材料本身的硬度都将影响材料的磨损性能，在该试验过程中材料磨损的机制以粘着磨损和磨粒磨损为主。

The friction and wear properties of the sintered samples were analyzed.

对烧结后的样品进行了摩擦磨损性能研究.

The wear scars shows that the nanocrystalline layer may reduce the effect of fatigue wear and improve the friction and wear properties of low carbon steel.

磨损表面形貌观察结果表明：表面纳米化处理能减弱低碳钢的疲劳磨损效应，提高材料的摩擦磨损性能。

Lubricated with molybdenum disulfide, these compounds also have excellent wear properties.

二硫化钼润滑，这些化合物也有优异的耐磨损性能。

The dry sliding friction and wear properties of the coating against YG8B hard alloy were evaluated using a pin-on-disc friction and wear machine.

利用销-盘式摩擦磨损试验机，以YG8B硬质合金为对磨偶件（盘），评价了涂层的干滑动摩擦磨损性能。

Ausform: To subject to deformation, quenching , and tempering to improve its wear properties.

奥氏形变法炼钢：使在经受形变后淬火和回火以增加抗磨损性。

The wear properties of hot-dipped aluminum and complex boroned after hot-dipped aluminum were tested on the MM2 wear tester under laboratory conditions.

用MM2型磨损试验机，在实验室条件下，对热浸渗铝和热渗铝复合渗硼试样进行了耐磨性的对比试验，并采用扫描电镜对磨损后的形貌进行观察分析。

Researches were made on the impact wear properties of low carbon high steels with different carbon contents on simulated conditions by using a modified MLD - 10 impact wear tester.

用改进的MLD-10型冲击腐蚀磨损试验机，在模拟工况条件下，对不同碳含量的新型衬板用低碳高合金钢冲击腐蚀磨损行为进行了比较；

The friction and wear properties of three types of permalloy audio heads were investigated under practical using conditions.

在实际使用条件下，研究了三种坡莫合金录音磁头的摩擦学性能。

The adhesion to substrate and friction and wear properties of the GLC film on UHMWPE substrate were investigated using a scratch tester and a ball-on-disk tribometer respectively.

用划痕仪和球-盘式摩擦磨损机研究了GLC薄膜与UHMWPE基体的界面结合力和GLC薄膜的摩擦磨损性能。