The paper introduces principle of scanning electronic microscope briefly;

简要介绍了扫描电子显微镜的工作原理；

The surface structure was observed under the scanning electronic microscope.

扫描电镜观察其表面结构。

The inverse contrast image is an image observed by the scanning electronic microscope.

反差倒转换图象是扫描电子显微镜能观察到的一种图象。

The ommatidial surface ultrastructure of ommateum of 6 butterfly species were observed with scanning electronic microscope.

利用扫描电子显微镜观察了6种蝶复眼小眼面的表面结构。

All utricles were observed by scanning electronic microscope, and the number of survival utricular hair cells was accounted.

所有椭圆囊均行扫描电镜检查并行毛细胞计数。

OBJECTIVE: to observe the morphological and histological characteristics by Scanning Electronic Microscope and chemical properties.

目的：探讨双茎类型西洋参在植物形态、电镜扫描、组织形态观察及化学成分方面的特点。

By scanning electronic microscope (SEM) it was tested for the interfacial state and morphological structure of different composites.

应用扫描电子显微镜(SEM)分别对不同复合材料进行了界面形态和微观结构的研究。

Scanning electronic microscope is used to check the fracture form of swing arm trier and energy spectral analysis is done in special area.

利用扫描电镜考察摇臂试验品的断口形貌，对个别区域进行能谱分析。

X-ray diffraction (XRD) and scanning electronic microscope (SEM) have been used to characterize the phase, orientation and surface morphology.

射线衍射和扫描电镜分别用于表征膜的物相、取向和表面形貌。

The anatomic and surface structures of the seed coat of 3 species of Soja are observed under the light microscope and the scanning electronic microscope .

在扫描电镜和光学显微镜下分别观察了黄豆亚属3种植物种皮的表面结构和解剖结构。

With the help of scanning electronic microscope (SEM), the same conclusion is proved by the interfacial state and morphological structure of the composites.

应用扫描电子显微镜(SEM)，分别对不同复合材料进行了界面形态的观察，证明与试验结果一致。

Method: Transmission electronic microscope and scanning electronic microscope were used to observe the ultrastructure of microvessel in cochleas of 10 chicks.

方法：分别应用透射电镜和扫描电镜对10只成年鸡内耳蜗管微血管的超微结构进行观察。

Pollen morphology of 10 plant species in tessellated meadow of Inner Mongolia was observed and described particularly under Scanning Electronic Microscope(SEM).

本文通过采用扫描电镜（SEM），对内蒙古五花草塘10种植物的花粉形态进行了详细的观察描述。

The surface defects of silver COINS was analysed with auger electron spectroscopy (AES), Scanning electronic microscope (SEM) and energy dispersive spectrum (EDS).

采用扫描电镜、能量色散谱和俄歇电子能谱检测方法，对银币表面缺陷进行了分析。

The samples were characterized by X-ray diffraction (XRD), Scanning electronic microscope (SEM), photoluminescence (PL) and X-ray excited luminescence (XEL) spectra.

分别以X-射线衍射（XRD）、扫描电子显微镜（SEM）、光致发光（PL）光谱及X-射线激发的发光（XEL）光谱对样品进行了表征。

SEM (scanning electronic microscope) was adopted to observe the morphologies of the oxidized alloys. The wear resistance and corrosion resistance property were assessed.

采用扫描电子显微镜对膜层进行了形貌分析，并对氧化处理前后样品的耐磨性和耐蚀性进行了测试分析。

Under scanning electronic microscope, four kinds of metal structure may be observed including black core phase, white core phase, gray ring phase and white adhesion phase.

在扫描电子显微镜下可观察到四种金相组织：黑色芯相、白色芯相、灰色环形相和白色粘结相。

The causes of the front fog lamp shield blistering after surface treatment are studied by means of metalloscopy scanning electronic microscope and energy spectrum analysis.

运用金相显微镜、描电镜和能谱仪，研究了前雾灯遮光罩表面处理后起泡的原因。

The observation of Scanning Electronic Microscope (SEM) on a shankbone shows that the bone is a kind of natural bioceramic composite consisting of hydroxyapatite and collagen protein.

扫描电镜观察显示胫骨是一种由羟基磷灰石和胶原蛋白组成的自然生物陶瓷复合材料。

Functional polysiloxane film and their orientation on fiber have been observed Band studied by scanning electronic microscope (SEM), contact Angle determination and other instruments.

研究不同官能基聚硅氧烷的成膜性及其在纤维表面的定向排列方式。

By using visual examination, scanning electronic microscope, X-ray energy spectrum and metallurgy and chemical analysis, the cause of crack occurred in bellow expansion joint was analyzed.

采用宏观检查、扫描电镜、X射线能谱、金相分析及化学分析等方法，对金属波纹膨胀节开裂的原因进行了分析。

Using scanning electronic microscope, gas hole of flowerpots were studied and analyzed quantitatively and a technical terms, gas hole degree was put forword, on which clustering analysis was based.

利用扫描电子显微镜观察，对花卉盆钵气孔进行分析，量化，并提出气孔度的新概念，按花卉盆钵气孔度大小聚类分类。

Scanning Electronic Microscope(SEM)and EDAX were used to analyze the surface defect of mandril for hot rolling steel tube. Appearance and growth of the surface defect were investigated and discussed.

采用扫描电镜及能谱分析对热轧管用失效芯棒的表面缺陷进行分析，探讨了芯棒表面缺陷的产生原因和长大机理。

The microstructures and properties of ZQA19-4 alloys were studied by Scanning electron Microscope (SEM) and electronic universal experimental machine.

采用扫描电镜和电子万能实验机，研究了合金元素对ZQA19 - 4合金显微组织和性能的影响。

The type DX 3 electronic scanning microscope has been wholly maintained, and its complexed circuit diagrams have been simplified.

对DX - 3型扫描电子显微镜进行了总体维修和复杂电路图的简化。

Analysis is made on the dark lines defects occurring over the working surface of flange by measurement with the optical microscope, Scanning electro microscope (SEM) and electronic probe.

针对法兰盘加工面上出现的黑纹缺陷，采用光学显微镜、扫描电镜和电子探针等测试方法对其进行了分析。

The results of electronic microscope scanning of sub-micrometer patterns by far ultraviolet lithography are given.

并给出远紫外光刻亚微米级图形的电镜扫描照片结果。