The machining way of the series of supporting hole is to bore hole by coordinate.

支承孔系的加工采用的是坐标法镗孔。

The construction methods and techniques of freezing bore hole are presented in this paper.

文中介绍了其冻结孔的施工技术及方法。

The location of a point feature, such as a bore hole , can be described by a single x, y coordinate.

线特征，例如公路和河流，可以被存储于一系列的点坐标。

This would assist the drilling of a bore hole into the mine, to take a gas reading from near where the miners are.

这将有利于向煤矿下钻孔，来读出矿工所在位置附近的气体指数。

To low production and low pressure wells, low pressure makes liquid depth in bore hole to be low before it closed.

低产低压油井关井后，井筒内出现段塞流，测试资料表现出很长的早期段。

Sometimes, the work over operation must be done to large diameter cased bore hole for the need of production of the well.

因生产需要，有时要对大套管井筒进行修井。

This paper discusses the factors affecting hole inclination measurement with horizontal liquid surface bore hole TV system.

提出水平液面式孔内电视系统测量孔斜的误差因素。

The trajectory of bore hole is proved to be formed by the resultant displacement of the bit instead of the resultant force.

由此得出，决定井眼轨迹的是钻头合位移方向，而不必是合力方向。

The engineering practice and the numerical simulation have been conducted on the millisecond blasting for ditching deep bore hole.

以工程实践和动力有限元程序分析沟槽深孔微差爆破问题。

This paper discusses bore hole histogram automatic drawing system, which is a vital part of engineering investigation information system.

作为工程勘察信息系统的组成部分，实现柱状图的自动绘制是其必需的功能。

But by many times of field applications, some shortages for bore hole selective tester is tested which needs a good completion and dev...

但经过多次现场使用，证实全通径选择测试阀还存在某些不足，需要进一步完善和改进。

A reasonable mechanical design of the main die body was given on the basis of considering every determining factors such as the bore hole condition (casing or not).

并根据井眼条件(有无套管)等方面因素，对打捞主体的机械结构进行了合理设计。

Meanwhile, the downhole motor and MWD are not affected and wellbore trajectory can be controlled because of the continuous fluid phase flow throughout the bore hole.

同时由于从井口到井底始终存在着连续的液相流，常规井下动力钻具和随钻仪器的性能不受影响，可以进行正常的井眼轨迹控制。

Based on the basic features of dynamic gas emission during boring process, a theoretical model for calculating the dynamic volume of gas emission from bore hole is set up.

基于钻孔过程中瓦斯动态涌出的基本特点，建立了钻孔瓦斯动态涌出量的理论计算模型。

Based on the basic features of dynamic gas emission during boring process, a theoretical model for calculating the dynamic volume of gas emission from bore hole is set up.

在全面分析钻井机械的组成、钻进过程的特点和人的特性的基础上，建立钻机钻进过程人机系统可靠性模型。

Based on the engineering practice, this paper introduced constructional technique and quality assurance measures of big bore hole digging and pouring with expansion pile head.

通过工程实例，介绍大孔径扩大桩头人工挖孔灌注桩的施工方法及质量保证措施。

If the section is a circular arc in the spatial slanting plane, the circular arc is the extremely reasonable bore hole path curve for slide drilling in minimum curvature method.

在此方法中，假设井段是空间斜平面上的圆弧，对于滑动钻进方式，圆弧是非常合理的井眼轨迹曲线。

This paper introduces a technique of erecting framework and rig at the upper part of the caisson, making underwater boring and oriented explosion by layers within the bore hole.

本文介绍了在沉井上部搭台架设钻机，进行水下钻孔，孔内分层定向爆破技术。

It is unable to solve the strain seismic wave of bore hole by wave equation because the mechanical characters of the media models inside and outside bore hole can not be determined.

由于钻孔内外的介质模型的力学性能不能测定，不能用波动方程来解钻孔应变地震波。

When the bore hole-top-enclosed grouting method is used to conduct high-pressure curtain grouting, shallow weathered broken rock is easy to be split, resulting in excessive grout loss.

采用孔口封闭灌浆法进行高压帷幕灌浆时，对于浅层风化破碎岩体易产生多次劈裂而流失过多浆液造成浪费。

In the organism is processed, the processing quality of the precise bore hole process will influence the performance, such as power, oil consumption, noise of the diesel engine, etc. directly.

机体加工中，精镗孔工序的加工质量将直接影响柴油机的功率、油耗、噪声等性能。

This article describe the concept and definiens of Angle of view of super wide Angle bore hole television system, and by means of this television system to measure the object in the well accurately.

本文提出了超广角井下电视系统视场角的概念及标定，以及利用该电视系统对井内落物尺寸进行精确测量的方法。

This paper proposes that Poisson's ratio of rock mass and in-situ stress are directly determined using optimization method according to measured strains obtained from bore hole stress relief process.

本文根据孔壁应力解除法获得的量测应变，提出了采用最优化方法直接确定岩体的泊松比和原始地应力。

Jack used a drill to bore a hole in the wall above the fireplace.

杰克用钻子在壁炉上方的墙上钻孔。

The video was taken with a camera lowered down a narrow bore-hole from the surface, some 700m (2, 300ft) above.

该视频由一架透过地面（离矿底约700米（2300英尺）高）一狭窄钻孔下伸的摄像机拍摄而成。

BORE: The process of enlarging an existing hole with a rotating cutting tool.

镗孔：使用旋转式切削工具扩大孔的过程。

The carpenter used a drill to bore a hole in the board.

木工用钻孔机在木板上挖个洞。

Machining the spark plug hole and counter bore at a compound Angle.

加工火花塞孔与反孔的复合角度。