The primary purpose of keys, splines , and pins is to prevent relative rotary movement.

的钥匙，样条的主要目的，是为了防止引脚相对的旋转运动。

Therefore, the key to the disaster prevention was to regulate the key blocks' rotary movement.

因此，控制关键块体的回转运动是防治压架的关键。

The machine USES inverter controlled rotary movement in the production can be based on the actual need for some adjustment within the optimal speed.

本机旋转运动采用变频控制，在生产中可根据实际需要在一定的范围内调节最佳速度。

These special machines allow components to be transferred to different work stations with a rotary movement and they are designed to manufacture our customer's parts in the most cost effective way.

旋转输送通过旋转运动来保证零部件在不同工位之间的快速运动。他们是为了满足客户的生产和自动化需求而设计和制造出来的定制专用设备。

By control the electric motor's torque and rotational speed, electric energy will be changed into mechanical energy, then mechanical rotary motion and repeated movement are realized.

控制电动机的转矩和转速，将电能转换成机械能，实现机械的旋转运动或反复运动。

The RM Rotary Actuator is designed to automate the operation of valves, gates, dampers, louvers and other positioning applications, requiring partial or multi-turn rotational movement.

RM旋转执行器设计主要用于自动调节阀门，电动门，阻尼器，遮光栅格和其他的定位应用领域，要求部分的或多圈旋转运动。

We obtained the optimal movement parameters of this cleaning system by quadratic universal rotary assembly experiment.

通过二次通用旋转组合试验，得到了该清选系统的最优运动参数。

Secondly, while the movement characteristics of materials in rotary kiln and its effect factor were researched, the paths and mechanisms of heat transfer in rotary kiln were analyzed.

其次，分析了回转窑内物料的运动特性及各影响因素，及回转窑的传热机理和热主要传输途径。

The automatic door performs the component parameter, and the common forms of the movement of the actuating component are rotary motion, linear motion, curvilinear motion and reciprocating motion.

自动门执行构件参数，执行构件常见的运动形式有回转运动、直线运动、曲线运动及往复运动。

The method of weakening centrifugal force in the rotary ring flume is proposed and sediment movement under the effect of periodic reciprocating current is tested in the ring flume.

介绍了旋转环形水槽的结构和工作原理，提出了削弱环形水流离心力的方法，通过环形水槽中周期往复流泥沙运动试验得出水体含沙量与床面剪切力和水体挟沙力之间的关系。

The worm gear functions to slow down and increase torque. Its output shafts spur four-bar linkage by which the movement is changed from rotary to swinging.

蜗轮蜗杆机构的作用是减速增扭，其输出轴带动四连杆机构，通过四连杆机构把连续的旋转运动改变为左右摆动的运动。

For example, consider a handling robot, with the hand axis mounted on a rotary axis, and where it is necessary to sense the dynamics of the hand movement relative to the higher-level rotary axis.

例如，考虑处理机器人，手轴与旋转轴上安装，并在有需要的感觉手运动的动力相对于更高级别的旋转轴。