Generalized octahedral shear stress theory

广义八面体剪应力理论

And the second cracks are caused by bending normal stress and vertical shear stress.

二次裂纹则是由弯曲法应力和垂直剪应力引起的。

The height of the sh, ear fine has little influence on the shear stress.

剪片高度对侧面剪应力几乎没有影响。

Maximum shear stress generally takes place at the neutral axis of ship section.

最大剪应力通常发生在剖面的中和轴处。

The effect of stress coefficients at fibre ends on shear stress and normal stress in fibre is linear.

纤维端部应力系数对剪应力和纤维正应力表现为线性影响；

Draw the element for maximum shear stress and mark values of all stresses.

画出最大剪应力的单元体并标出全部应力值。

The shear displacement for the dilatation is always less than that at the peak shear stress.

剪应力达到峰值所需要剪位移总是比剪胀发生时所需的剪位移大。

Then the stress distribution of anchored rock mass with partial pull-out failure is analyzed based on the maximum shear stress criterion.

基于最大剪应力破坏准则，分析了局部脱粘破坏锚固体的应力分布。

The observed inlet dimple can be tentatively interpreted by limiting shear stress or wall slippage.

润滑油的极限剪应力特性及其诱发的界面滑移为凹陷产生的原因.

When the maximum shear stress is greater than the shear strength in the snapped zone of the slope, it will slip and landslide happens.

当最大剪应力的剪切强度大于在快照区的斜坡，它会打滑和山体滑坡发生。