Current has obviously affected on wear rate compared with loading.

在试验范围内，电流比载荷对磨损率的影响显著。

The wear rate of graphite increases with the load, and the wear rate of IG11 is lower than that of MG.

石墨的磨损速率随载荷增加而增大，石墨IG11的耐磨性优于MG的。

Speed the influence for wear rate is to follow speed accelerate , wear rate submits the oblique word type change Zhi.

速度对磨损率的影响为随速度的加快，磨损率呈斜“之”字型变化。

A peak of the wear rate under certain velocity was found.

发现在一定滑动速度下磨损率有一峰值。

The wear rate of the polymer tapes increases with the loads.

PEN薄带的磨损率随载荷的增大而增大。

When thickness increases above a certain value, wear rate becomes unchanged.

但厚度增加到一定值时，磨损速率不变。

While giving other parameters, wear rate increases along with the increase of contact area.

当其余各影响参数保持一定值时，磨损率随接触面积的增大而增大。

Under given loads, the wear rate of composites decreases with the content of fly ash increases.

当载荷一定时随飞灰含量增加,复合材料的磨损率降低.

The results show that the wear rate of bonded graphite solid lubricating coating decreases with the increase of velocity.

而摩擦因数随着试验载荷增大而减小，随摩擦速度增大而缓慢增大；

Result indicates that the change of cutting force in radial and the wear rate of the tool can be controlled effectively by adjusting feed rates.

结果表明：通过调节进给量能够有效地控制径向切削力变化，同时，能够较好地控制刀具的磨损速率。