Die-face optimum design technique based on formability analysis is studied.

研究了基于成形性分析的型面优化设计技术。

Historically, if greater strength was required, it was at the expense of formability.

历史上，如果更大的力量是必要的，它是在牺牲成形。

In this paper, the formability of cold rolled steels after laser welding were analyzed.

在本研究中，对汽车用冷轧钢板在激光焊接后成形性能进行了细致的分析。

The squeezed-casting formability of AZ91D magnesium alloy in semi-solid state was studied.

研究了AZ91D镁合金在不同半固态温度下的挤压铸造。

The optimum blank shape also can be designed according to the formability of the forming part.

最佳空白的形状，又可以设计根据成形形成的一部分。

Formability of magnesium alloy (AZ31B) sheets can be investigated by thermal deep drawing experiments.

镁合金(AZ31B)板材的成形性能可以通过热拉深试验来进行观察评估。

This paper mainly investigated the formability of knitted structures used for composite reinforcement.

本论文主要探讨了用于复合材料增强的针织结构的适型性能。

Thirdly, plastic strain ratio and strain hardening index are the two key parameters of material's formability.

塑性应变比与应变硬化指数是评价板料成形性能的两个重要参数。

To reduce the forming force, techniques that are improving the formability of coining with micro-feature were studied.

并以有效降低成形力为目标，研究探讨提高微细特征成形性的工艺措施。

The formability of galvannealed steel plate depends on both the character of the substrate and the nature of the coating.

合金化热镀锌钢板的成形性既取决于基体钢板的特性，也决定于镀层本身的成分和结构。

These composite materials have superiorities in size stability, formability, stretching resistance and impact resistance.

这种复合材料在尺寸稳定性、成型性、抗张力和抗冲击方面均具优势。

This paper combines the technology of semisolid forming and micro-forming to discuss the micro-formability of semisolid alloy.

结合半固态成形技术与微成形技术，探讨半固态金属的微成形性能。

The numerical simulation result indicates that the variable blank-holder force can improve the formability of box deep drawing.

模拟结果表明，变压边力控制技术可以显著地改善矩形件的成形性能，增加矩形件的拉深极限。

Some simulated formability related to essential formability strongly, and the coefficient of total correlation reached more than 0.95.

有的模拟成形性能指标甚至与基本性能之间存在着较强的相关性。全相关性系数达0 . 95以上。

Blank design plays an important role in the process design of sheet metal drawing due to its great impact on the formability of a part.

毛坯外形设计是工艺设计的重要环节，它直接影响工件的成形质量。

We have observed RBC membrane fluidity, serum lipid peroxide, RBC DE - formability and fragility in 10 burn patients on PBD 2, 3 ~ 5 and 6 ~ 10.

我们观察了10例烧伤病人伤后2天，3 ~ 5天，6 ~ 10天的红细胞膜流动性、血浆过氧化脂质含量、红细胞异形率及脆性的变化。

The post-batch-annealing can improve the formability of hot dip galvanized sheet, but the formability is mainly determined by up stream process.

后罩式退火也可以改善低碳铝镇静钢热镀锌板的性能，但其冲压性能主要取决于后罩式退火前的各工序。

The reasonable shape of the blank can improve the formability of the sheet metal, make full use of the material, decrease the work of finishing repair.

合理的选择板壳零件的毛坯外形，可以提高板料的可成形性，同时也提高了材料的利用率，减少成形后的修边工作量。

Yoshida Buckling test (YBT) which has been developed by Japanese famous scholar Yoshida is a notable test for appraising the sheet stamping formability.

方板对角拉伸试验即y BT模型是日本冲压行业著名学者吉田清太提出的评价板材冲压成形性能的著名试验。

The key of this technology is the formability and the control of the thermal stress. And these are associated with the temperature field and stress field.

熔积成形的技术关键是成形性与热应力的控制，而这些与成形过程的温度场和应力场紧密相关。

The results show that changes of weld-line shape and thickness ratio have significantly different effect on the formability of curvilinear-weld-line TWBs.

研究结果表明，焊缝形状以及厚度比对不同类型的曲线焊缝拼焊板成形性的影响程度明显不同。

For improved economics and NNS (Near Net Shape) formability, encapsulation-free Powder Extrusion process and coining type Powder Forging process were developed.

为了改进经济性与近终形(NNS)成形性，开发了无包套粉末挤压工艺与精压式粉末锻造工艺。

The simulation test results obviously showed that VBHF had great effects to drawing formability of hot-galvanized sheet steel during the rectangular box drawing.

变压边力数值模拟试验结果表明，采用变压边力控制矩形件拉深成形过程时，变压边力对矩形件拉深成形特性影响显著。

The influence of BST concentration in precursor, pH value of the solution and spin speed on the formability of BST thin film was investigated by XRD, SEM and AFM.

通过XRD、SEM、AFM等测试手段对制得薄膜进行物相分析和形貌观察，分析各个因素对BST薄膜成形性的影响。

HSS can reduce vehicle weight and increase security, but because of its own material properties, there is the biggest problem of poor formability and more springback.

高强度钢板可以减轻汽车重量并增加安全性，但由于其自身材料特性，存在的最大问题是成形性能差和回弹较大。

Aluminum alloys present higher formability under electromagnetic forming, so this opens up a broad application prospect for electromagnetic forming in auto industries.

电磁成形可明显提高铝合金的的成形性，因此在汽车工业中有广泛的应用前景。

In addition, by the cluster analysis the article educes the relationship between the performance of fabric and formability index which is tested by FAST testing system.

另外，利用FAST测试系统测定了织物的成形性指标，并通过聚类分析得出织物的服用性能与成形性指标之间的关系。