Dip in loose or pressed powder and tap off excess.

浸在松动或粉饼，挖掘多余的。

Carry a touch-up kit with concealer, pressed powder, lipstick or gloss7, lip liner and tissues.

携带一个装有遮瑕膏、粉饼、口红或透明唇膏、唇笔和面纸的补妆包。

Fine pressed powder, special brush. Soft, natural colours fill in and perfect brows with no harsh lines.

细滑压花粉，特制眉刷，柔软，自然的颜色让你轻易塑造完美眉形。

Combined with pressed powder and loose powder of the same series, it can build smooth and watery skin easily.

与同系列的粉饼、蜜粉和谐搭配，轻松打造清透水滑肌肤。

At least a part of the pressed powder core part forms at least a part of a winding slot part around which a winding is wrapped.

所述压粉铁芯部的至少一部分构成线圈槽部的至少一部分，在所述线圈槽部上缠绕有线圈。

I would just like to say how much I love your All Bases Covered Foundation, No Slip Concealer and Healthy Finish Pressed Powder.

我只想说，我是多么爱你的所有基地覆盖基金会，没有滑遮瑕和健康的完成压粉末。

A stator core includes a pressed powder core part which is formed by compressingly molding a magnetic powder covered by an insulation coating.

一种定子铁芯，包括通过对覆盖有绝缘覆层的磁性粉末进行压缩成型 而制成的压粉铁芯部。

The pressed powder core part comprises a winding guide groove preventing the winding along the extending direction of the winding slot part from being displaced.

所述压粉铁芯部包括用于防止所 述线圈沿所述线圈槽部的延伸方向偏移的线圈引导凹槽。

Powder forged parts generally are not as close to final size or shape as cold pressed and sintered parts.

粉末锻造零件通常不像冷挤压和烧结零件那样接近最终尺寸或形状。

Powder Metallurgy produces fully dense pressed components and is very economic for high volume production of small simple shapes.

粉末冶金能够制造出精密压缩的组件，对于高容量小形状的产品来说特别经济实用。

It is also ground to an extremely fine powder for maximum absorption, and then either packed in plastic sachets for maximum freshness, or pressed into tablets.

这也是理由非常精细粉末的最大吸收，然后或者装在塑料保鲜袋最大，或压制成片。

Irregularly shaped powder particles must be used to provide adequate green strength in the as-pressed component.

必须采用不规则形状粉末微粒为压制零件提供足够的未加工强度。

A mixture of metal powder and a binder is pressed into a mould to form the shape of the finished part.

金属粉末和粘合剂混合在一起并压制成模子，最后形成成品的形状。

In powder forging an as-pressed component is usually heated to a forging temperature significantly below the usual sintering temperature of the material and then forged in a closed die.

在粉末锻造中，压制零件一般加热到远低于该材料通常烧结温度的锻造温度，然后在闭模中锻造。

The crush strength of pressed pellets of capacitor grade tantalum powder which is used for making tantalum solid electrolytic capacitor was tested.

用电容器级钽粉压成适于制作固体电解电容器阳极的坯块， 压缩测定其生坯强度。

A type of furnace especially for powder metallurgy pressed sintering is introduced.

介绍了一种专用于粉末冶金加压烧结的炉型。

With powder sample being pressed into piece, a method for XRFA of fluorspar has been established on the basis of matrix corrections. The method proved to be rapid accurate and cheap.

采用粉末直接压片法，通过基体校正等手段，建立了氟石X射线荧光分析方法，该方法快速、准确、成本低。

Thee mixture of tungsten carbide and cobalt powder is pressed into the required shape and then sintered.

碳化钨和钴粉末的混合物被挤压成所需形状后进行烧结。后进行烧结。

The product form is: there is bentonite powder or particles between the two layers of geotechnic cloths; they are pressed together through pins.

普通膨润土防水卷材的产品形式为，上下两层土工布中间夹膨润土粉或颗粒，经针压将三者复合到一起。

The main material of SMC is the high purity iron powder, insulated on the surface, pressed with the powder metallurgy tech, heated to be the SMC cores.

铁芯是以高纯度的铁粉为主要原料，将粉末颗粒表面进行绝缘化处理，运用粉末冶金技术经压制成型，热处理后所制备出的一类新型软磁材料产品。

This study prove the method that the granules can be directly-pressed after powder taste-mask coating by fluid-bed, and it is suitable for producing the orally dissolving tablets.

本研究证明，流化床粉末包衣掩味后压片的工艺适合于制备日腔速溶片。

Porous metal parts differ from standard P/M structural parts in that they are pressed at lower pressures and may tight mesh cuts of powder in order to achieve specified porosity requirements.

多孔金属零件与标准P/M结构零件不同他们被按以低压，并且也许紧紧捕捉粉末裁减为了达到指定的多孔性要求。