Note the small setscrew on the pinion gear... they strip easily.

注意在小齿轮的小型固定螺丝…他们很容易剥离。

This is the cross slide feed screw and two homemade setscrew collars.

这是两岸幻灯片feedscrew和两个自制固定螺丝的衣领。

Loosen the setscrew that secures the ring with the time meridian indicator.

松开固定时间子午线指示环的定位螺丝。

The leadscrew is threaded into half of the journal and one of my homemade setscrew collars is keeping it in place.

在丝杠是线程到一半的杂志和我的衣领一自制的固定螺丝，是保持到位。

Set "0 hour" on the R. A. and hour graduation ring to the R. A. indicator after loosening the graduation-ring setscrew.

松开赤经兼小时刻度环的定位螺丝后把赤经兼小时刻度环“0小时”位置对准赤经指示箭头。

Equipped with four different electromotive spanner, can be in the sleeve size 3 seconds easily remove or tighten various kinds of car wheels setscrew 1.

电动扳手配备4种不同尺寸的套筒，可以在3秒内轻松拆卸或者紧固各种汽车的车轮固定螺丝1个。

Trying to remove these setscrews with a hex wrench (aka Allen wrench) that is the wrong size or even slightly worn will very likely strip the drive cup of the setscrew.

试图删除这些固定螺钉用内六角扳手（也称为内六角扳手），这是错误的大小，甚至轻微磨损很可能会剥离驱动杯的固定螺丝的。