Fewer workers are needed to solder circuit boards.

焊接电路板需要较少的工人。

This makes for the best solder job.

这是为了使焊接至臻完美。

They forget to solder the contacts.

他们忘了焊接那些触片。

In the test the solder ability plating coating.

在测试电镀镀层的焊锡能力。

Equipment specifically designed for use with solder paste.

于专为锡膏设计的设备中使用。

Becareful not to overheat the solder and damage the diodes.

注意不要使烙铁过热而损坏二极管。

Before you solder, make sure that the pipes fit together properly.

焊接之前，要确认管子是否般配。

Solder the power wires, positive and negative battery contacts.

焊锡线的力量，积极和消极的电池接触。

Carefully solder 2 new thin, flexible, insulated wires in place.

小心的将两条细、易弯曲并且绝缘的新导线焊接到位。

Will the sample needs of solder part in flux in 5 to 10 seconds.

将样品需要焊锡的部分浸入助焊剂中5到10秒。

As a reward for hais bravery, the solder was given a gold medal.

为了表彰他的勇敢，这个士兵被授予一块金牌。

I chose to place, and solder, a lot of the components all at once.

我选择的地方，和焊料，在一次所有组件很多。

The use of nitrogen will depend on the solder paste flux chemistry.

是否使用氮气取决于焊锡膏焊剂的化学特性。

Used with the solder wire together, soldering a stainless steel etc metal.

同锡线一起使用，焊接不锈钢等难以上锡的金属。

At this stage, it's easy to remake a solder connection if there is a problem.

在这一阶段，如果存在问题，可以很容易地改造焊接的连接点。

Joints between reinforcement members can be made satisfactorily with tin solder.

锡焊能够满意地做成加筋构件之间的接头。

We will mill, cut, mold solder, program, and draw our way to evaluating product design.

我们将使用磨、切割、焊接铸模、设计程式且推断出自己一套衡量产品设计的方法。

Operate machines or equipment which weld, solder, bolt, screw or rivet metal parts together.

操作机器或设备，焊接，螺栓，螺钉或铆钉金属零件。

Soldering is one of China's largest manufacturers solder one of the production and marketing.

一本焊锡是目前中国最大的焊锡生产和销售厂家之一。

Weld, braze, cement, solder and thread joints to join pipes and fabricate sections of piping system.

焊接，钎焊，用水泥涂抹，焊锡和螺纹接头，使其连接至管道，从而制造管道系统截面。

It's very wise to keep a soldering iron, a roll of solder and desoldering equipment handy at all times.

身边总是有垂手可得的电烙铁和拆焊设备是十分明智的。

This may seem like a con, but because anyone can solder anything to the pads, it makes the unit pretty universal.

这似乎是一个反面的，而是因为任何人都可以在任何焊垫，它使单位相当普遍。

Process modifications such as solder pot finishes for wave soldering equipment to avoid leaching issues are now available.

为避免出现浸析问题，诸如波焊设备焊锡槽终饰工艺的修改目前已经完成。

The text on the two solder mask layer is same, we will cancel the text that on this solder mask layer, please refer to Q9.

此层上的字符与另一层绿油上的字元相同，请确认是否可以取消此层上的该字符。请看Q9处。

Just remove the black wire and the solder that attaches it to the diodes and the same solder that connects the two diode together.

只去掉黑线和连接用的焊锡以及在相同部位连接两个二极管之间的焊锡。