变形分析主要有变形数据预处理和变形预测.

Deformation analysis generally includes deformation data preprocessing and deformation forecast.

结合相对运动参数, 提出了一种逐渐趋近的变形分析方法.

Combining with the relative movement parameters, a deformation analysis method of successive approximations is presented.

研究成果可为深部高应力软岩巷道的变形分析与稳定性控制等提供参考。

The research results can provide a reference for the deformation analysis and stability control of the deep soft rock roadway with high ground pressure.

介绍了非连续变形分析(DDA)方法和强度折减法的基本理论, 提出了基于DDA的强度折减法求土坡安全系数的方法.

The general principle of DDA, discontinuous deformation analysis, and the shear strength reduction are discussed simply.

金属材料的激光冲击变形分析及其实验研究。

Analysis and experiment on deformation of sheet metal by laser shock wave .

以圆柱坯热镦粗和方条料热拔长问题为例，论述了该方法在刚塑性变形分析中的应用。

It was discussed in the paper that the method applied to the analysis of rigidly plastic deformation through examples of upsetting a cylindrical billet and drawing a square billet.

惯性约束聚变靶场编组站大口径光学元件的热变形分析。

Thermal Transfiguration Analysis for the Large Aperture Optical Element of Switchyard in ICF Driver Target Area.

用非线性数值分析方法进行基坑变形分析的工作量相当大,时间很长.

Analyzing these factors with nonlinear numerical method need long time.

在旋压周向、径向变形分析的基础上，确定了旋压道次、运动轨迹和进给速度的选用原则；

On the basis of analyzing spinning deformation in the circular and radial directions, the selecting principle of spinning pass, spinning orbit and spinning speed can be obtained.

本文在外载相同、艇体结构质量相等的条件下，对三种不同结构形式的艇体进行了应力与变形分析。

In this paper, the stress and deformation of three different structuring forms of ship hull are analyzed under the conditions of the same external load and the equal mass structure.