The method supplys grinding of deep blind hole a economic and reliable technology.

该方法为深盲孔的磨削加工提供了经济可靠的工艺方法。

The small blind hole method is used for the measurement of residual stress inside T joint.

采用盲孔法测定了丁字焊缝的残余应力。

This machine mould replacement can system standard bricks, blind hole brick and other alien products.

本机更换模具可制标砖、盲孔砖及其它异型制品。

On the basis of the conclusion, the influence of the depth and diameter of blind hole on the gun body strength was studied.

并在此基础上，研究了盲孔直径及深度对射孔枪强度的影响。

Retaining mechanism, with a tiny stroke clearance, solves the problem of high precision machining on small pieces and blind hole pieces.

冲程间隙极小的锁紧机构更能解决短小零件及盲孔零件等高精度加工难题。

At the end, some general instructions for the process design of flash die forging of axisymmetric gear blanks with blind hole were suggested.

最后，给出带盲孔的轴对称锻件的闭式模锻工艺设计的一般性指针。

For the flexible stress transfer system, we present an application for patent which is a CIP device for molding a ceramic tube with blind hole.

针对柔性应力传递系统，申请了“一种带盲孔的陶瓷管冷等静压成型装置”的专利(已受理)。

This paper introduces the criterion of selecting pump, detonation mode, principle and action of inner blind hole perforator and tubing pump joint technology.

介绍了内盲孔射孔器与管式泵联作技术的选泵标准、起爆方式、原理和流程以及内盲孔射孔器的研制。

Thanks to its own characteristics, such as blind hole, lumen groove finishing, traditional finishing have some limits for surface which are difficult to machine.

传统的光整加工方法，因其工艺特点，使用时都有一定的局限性，对内腔沟槽、盲孔等难以加工。

The main cylinder of hydraulic press is ground by self-made belt grinding device. The method supplys grinding of deep blind hole a economic and reliable technology.

本文阐述了利用自制的砂带磨削装置，对液压机主缸内孔行进磨削加工。该方法为深盲孔的磨削加工提供了经济可靠的工艺方法。

When he had turned the Angle of the gallery, the distant glimmer of an air-hole disappeared, the curtain of obscurity fell upon him once more, and he became blind again.

当他转过了巷角以后，远处通气洞的光线就消失了，黑幕又在他前面落下，使他再次失明。

If the same holes were built today, many golfers would criticize the fourth hole for its blind tee shot, which even Dr.

如果今天在建造同样的球洞，很多球手都会批评四号洞的盲打，甚至麦肯齐博士也会承认它不太理想。

The matellization process of blind via or though hole is also achieved by means of copper electroplating.

盲孔或通孔的属化制程也是直接用电镀的方式完成。

In some ways, this hole is' double blind 'with the fairway disappearing over the brow of the hill and tumbling down two distinct levels.

不太喜欢这一个从某种意义上说，这个洞是'双盲'与在额头消失航道在山和翻滚了两个不同的层面。

Based on the blind-hole method, series of experiments are carried out to analyze the effect of alternate loading to the redistribution of residual stress.

本文基于小孔释放法测量残余应力的方法，通过实验研究了交变载荷对焊接残余应力场产生的影响。

The initial residual stress of the polymer bonded explosive based on TATB and its distribution were tested by blind-hole drilling method.

为检查小湾水电站转轮焊接、退火效果，采用了盲孔法及压痕法对转轮退火前后的残余应力进行了测试。

Blind-hole lower bushing prevents leakage.

“盲孔”下部衬垫能够防止泄漏。

In view of the sample which have scanning blind area such as a deep hole, alignment method is presented based on the characteristics of data.

针对存在光学扫描盲区(如深孔)的样件，提出了基于特征的数据对齐方法。

The machine applies to varieties, molds can be prepared to replace standard bricks, blind-hole hollow brick other profiled products.

本机适用品种多，更换模具可制标砖、盲孔空芯砖其它异型制品。