For example, you can use Telnet.

例如，您可以使用telnet。

Secure TELNET with automatic logoff feature

利用自动下线特性确保 TELNET 的安全

Step 8: Telnet/deploy on WAS and restart

步骤8：WAS上的远程登陆/部署和重新启动

SSL can also be used to secure Telnet sessions.

还可以用ssl来保护Telnet会话。

Errors reported from a failed Telnet command.

失败的telnet命令报告的错误。

Messages reported from a successful Telnet command.

成功的telnet命令报告的消息。

Log in to remote_wpar using either clogin or Telnet.

使用clogin或者telnet登录到remote_wpar。

Code 5: Verify the TELNET automatic logoff functionality.

代码5：验证telnet自动下线功能。

To connect to it once it's running, try Telnet localhost 6173.

要该程序一运行就连接到它，请尝试telnet localhost 6173。

The root user should not be allowed to login directly via Telnet.

应该不允许root用户通过telnet直接登录。

Looking at a typical Telnet client scenario, this is how it works.

下面看一下典型的telnet客户端场景，它是这样工作的。

By default, the Telnet server is enabled and running on Solaris 10.

在缺省情况下，已启用了Telnet服务器并运行于Solaris 10。

You will connect to the memcached server using a simple Telnet client.

您将使用一个简单的telnet客户机连接到memcached服务器。

So, instead of TELNET let us SSH into the machine and test the behavior.

所以，我们不使用TELNET，而使用SSH登录机器并测试行为。

The system prompts you for the user's password — this is like Telnet.

系统提示您输入用户密码——这与Telnet相似。

Once you have a Telnet client installed, execute the command in Listing 4.

安装了telnet客户机之后，执行清单4中的命令。

A lot of solutions prefer SSH over TELNET for its default secure behavior.

由于其默认的安全行为，很多解决方案喜欢ssh胜过telnet。

After the WPAR has started, you should be able to log in remotely using Telnet.

在WPAR启动之后，您应该可以使用telnet进行远程登录。

The console user accesses port 2301 on the primary iSeries partition via Telnet.

控制台用户通过telnet访问主iseries分区的2301端口。

To test it, use a Telnet client or the test case provided with the download.

要测试它，使用telnet客户机或下载提供的测试用例。

Log into the SAN switch as admin (default password is password) using Telnet.

以admin(默认密码为password)通过telnet登录到SAN交换机。

The easiest way to do this is with the telnet command, which is shown in Listing 6.

做到这一点的最简单的方法是使用 telnet 命令，如清单 6 所示。

Telnet with Kerberos can use only Kerberos, which is based on secret-key technology.

用Kerberos的Telnet仅可以使用Kerberos, Kerberos是基于密钥技术的。

To verify connectivity to the mainframe, run this command: telnet .

要检验到主机的连接，请运行以下命令： telnet 。

The client tries to connect via a telnet session to a host that has wrappers configured.

客户端试图通过 telnet 会话连接到配置有 wrappers 的主机上。

Next, configure the switch for remote management (using Telnet or SSH) by doing the following.

接下来，执行以下操作配置交换机实现远程管理(用telnet或SSH)。

Configure and enable the Kerberos authentication in Telnet, FTP, and r-commands on AIX v6.

在AIX V6上的telnet、FTP和r命令中配置和启用Kerberos身份验证。

The following listings demonstrate what a failed and successful Telnet command should look like.

下面的清单展示了失败和成功的telnet命令。

For example, the tcpip group contains the inetd subsystem, which manages the Telnet sub-server.

例如，tcpip组包含inetd子系统，它管理telnet子服务器。