I flange production company in 5000 tons, 500 tons of various forgings.

我公司年生产法兰盘5000吨，各种锻件500吨。

The strength and ductility of forgings are better than that of castings.

锻件的强度、塑性和韧性优于铸件。

The parting technology of blade forgings is the key point in forging work.

叶片锻模的分型技术是叶片锻造加工的关键技术。

A method for estimating cyclic life of forgings containing flaws is presented.

本文介绍了缺陷转子锻件循环寿命的估算方法。

The conventional technologies for heavy forgings tend to generate crack origins.

大型锻件的常规生产工艺存在萌生裂纹源的变形机制。

Representative forging processes of aeronautical large size forgings are introduced.

介绍了国外飞机大型锻件的典型锻压工艺。

For example, castings, forgings, or bar, shape, size, machining allowance, and so on.

例如铸件、锻件或棒料、形状、尺寸、加工余量等。

Sharp corners are stress-risers in the forgings, as well as make the dies weak in service.

锐角会增加锻件中的应力，同时在使用时削弱锻模。

The application foreground and market requirement of aluminium alloy forgings are analysed.

分析了铝合金锻件的市场需求及应用前景。

The quality of high-quality, low price is your ideal choice for the processing of the forgings.

优质的品质，低廉的价格是您加工锻件的理想选择。

The paper briefly introduces the carbon and low-alloy steel forgings standard for pressure vessels.

本文简要介绍了压力容器用碳素钢和低合金钢锻件标准。

The internal cracks originated from inclusions are one of main forms of defects for heavy forgings.

夹杂性裂纹是大型锻件致废的主要缺陷形式之一。

The latter solves the difficult problem of the "meat pie" defects existing in the heavy disk forgings.

后者解决了大型饼类锻件中出现的“夹馅饼”缺陷的难题。

Ultrasonic testing shows on flake defects in theheavy forgings of ESR steel without any diffusion annealing.

未经扩氢退火的电渣钢大锻件经超声波检验，未发现白点缺陷。

Forgings yield parts that have high strength to weight ratio, thus are often used in the design of aircraft frame members.

锻造生产的零件具有较高的强度重量比，所以常被用在飞机结构零件的设计中。

Castings and forgings and hydrogen brittleness sensitivity to the spare parts of the appropriate USES weak acid galvanizing.

铸锻件和对氢脆敏感的零件宜用弱酸性镀锌液。

The upsetting deformation is the main forming mode for heavy disk forgings and the inclusion defects is the main quality issue.

镦粗变形是大型饼类锻件的主要成形方式，夹杂性缺陷是其主要质量问题。

Unhealed porosities and free surface of dendrites with crystalline steps were occasionally observed in aluminium alloy forgings.

铝合金锻件中有时有未锻合的疏松和残留的枝晶自由表面，并保留有原始的结晶台阶。

For Vendors in China, the following forgings shall be of Class III or higher, other forgings shall not be of less than Class II.

对于中国的卖方，以下锻件应为II i级或以上，其它锻件不应小于ii级。

Besides, the crossing contrast test has teen made by using bar forgings, the test result shows that forging MB26 ingot is practicable.

同时还与棒材锻件做了交叉对比试验研究，试验结果表明，用MB 26铸锭锻造是可行的。

It emphasizes the chemical compositions and mechanical properties of low temperature nickel steel plates, forgings and welding materials.

文中重点介绍了镍系低温钢钢板、锻件和焊接材料的化学成分和力学性能。

In automobile gearbox production, the normalizing quality of forgings directly affect the machining of part and the quality of finished product.

在汽车变速箱生产中，锻件的正火质量，直接影响着零件后续机加工及最终成品率；

It has been proved that the adopted diversity heat treatment is a new method of realizing different property on relevant rotor forgings locations.

实践证明，采用差异热处理是对转子锻件不同部位实现不同性能要求的一种新的热处理方法。

Forging technology of complicated large crossing shaft has been probed into, which can be used for reference to forming of similar type of forgings.

探讨了复杂类大型十字轴锻件的锻造成形工艺，该工艺对同类型锻件的成形也有借鉴价值。

With analysis of structure of cone roller bearing inner ring forgings, corresponding improvement on original forging technology has been put forward.

分析圆锥滚子轴承内圈锻件结构，对原锻造工艺中的不足提出了相应的工艺改进措施。

Based on analysis on the reasons for the defects in large sized forgings during steel making, heat treatment and, the preventive measures were formulated.

分析了锻件生产过程中，在锻造、热处理以及炼钢中经常产生缺陷的原因，并提出了预防措施。