This gasket ring can't be used any more.

这个钢圈不能用了，换个新的。

The outside steel lagging fastens both ends of the pipe and wrap the gasket ring to realize the tight coupling between pipes.

外钢套扣住钢管两端并包裹密封圈。实现钢管密封连接。

Secondly, the flange gasket sealing ring has been replaced to ensure that the sealing face of sealing surface of the match.

其次，法兰垫片已被密封环所代替，以确保密封面对密封面的匹配。

The large flange gasket is a ring which can produce plastic deformation and has a certain strength.

大型法兰垫片是一种能产生塑性变形，并有一定强度的材料制成的戒指。

The condenser is a tube, elbow, metal hoses, fasteners, F4 rubber lined steel corrugated ring gasket and support component.

本冷凝器是由一组套管、弯头、金属软管、紧固件、F4橡胶内衬不锈钢波纹环垫片及支架组成。

In such cases, can switch to spiral wound gasket, "o" ring and so on, are now a number of factories he already adopted.

遇到这种情况，可改用缠绕垫片，“O”形环等，现在许多厂已采用。

Teflon - lined pipe, casing, elbow, the three exchanges or four, size head, cylinder, air compressor - oxygen - ring, gasket seal ring and auto parts.

聚四氟乙烯内衬直管， 套管，弯头，三通，四通，大小头，筒体，空压机-制氧机- 活塞环、密封圈和汽配封圈。

In the direction of the existence of the outer ring gasket with high residual compression stress of the closed ring, the close of their joints have a crucial role.

在垫片的外环方向存在着具有较高残余压紧压力的闭合环带，它们对接头的紧密性有非常关键的作用。

The only thing left to do now is manufacture an O-ring gasket.

唯一没有做的事情，现在是制造一O形圈垫片。

Usually there are 12 categories which are bolt , stud, screw, nut , self tapping screw, wood screw, gasket, retainer ring, pin, composite member, bolting, and soldering lamp.

它通常包括以下十二类零件：螺栓、螺柱、螺钉、螺母、自攻螺钉、木螺钉、垫圈、挡圈、销、组合件和连接副、焊钉等。

A gasket (21) which had better be plastic extends from the chopping ring (20) to the inlet (16) and lowers the noise produced when the processor is used.

一最好是塑料的衬垫(21)从切碎环(20)伸展到进口(16)。该衬垫(21)降低该处理器使用时产生的噪声。

One example about the decrease in diameter of ring joint gasket is reported. The reason of decrease in diameter is caused by compressive stress that make the whole gasket yielded.

报道一例八角垫直径缩减现象，指出直径缩减原因是垫圈整体受压屈服。

The pressure cooker with the double leak-prevention seal ring is characterized in that the metal rim (5) is mounted in the center of the rubber gasket(4).

锅构成双重防漏密封圈高压锅其特 征在于胶圈（4）中心安装了有孔金属圈（5）。

Ring joint gasket are metallic sealing rings suitable for high pressure and high temperature dutries.

金属环垫是用于金属材料加工而成的垫片，适用于高温高压的密封。

The structure and operation of the ring gasket used in the high pressure flange seal were briefly stated in this article.

概述了高压法兰透镜垫密封的结构和运行状况。