Blade tip lock check valve

铲刀倾斜止动单向阀

Folding Blade Knife thick 1. 0 mm slot width 2 mm, blade tip and sample contact semicircle, its radius of 0. 5 mm.

折叠刀片厚1.0毫米，刀缝宽度2毫米，刀片端部与试样接触呈半圆形，其半径为0.5毫米。

The mixture was ignited at the blade tip by an automobile sparking plug .

被点燃的混合物在叶尖的汽车火花塞。

The blade tip speed is limited to subsonic. The formulation is based on the FW-H equation.

本方法是基于对FW-H方程的准确求解，并限制螺旋桨叶尖相对速度为亚音速。

The over- limit and visual cracks occurred in an aero -engine high pressure turbine blade tip were repaired using laser welding.

采用激光熔焊法，排除了某型发动机高压涡轮工作叶片叶尖裂纹超标及开口型叶尖裂纹故障。

The results of the study indicate that the blade tip clearance will lead to a flow blockage at the top zone and increase the separation loss at that zone.

使用非结构化网格上的有限体积法，数值研究一半开式离心压缩机叶轮的内部流场、气动性能随叶顶间隙的变化规律。

The blade tip crack of the high pressure turbine is repaired by using the laser welding, which can reduce effectively the repair cost and increase the economic effectiveness of the engine repair.

采用激光熔焊方法，修复了高压涡轮工作叶片叶尖裂纹，有效降低了发动机修理成本，提高了发动机修理的经济效益。