Windows must not be press fit into stripper.

窗口入子不需要与脱板压配合。

The collar is adapted to press fit with a medical device.

该套环适合于和医疗设备压配合。

The press fit experiments on the knurling connection were performed.

并进行了滚花连接压装试验。

The press fit defect of railway wheelset would cause serious safety problem on the train.

轮对的勒伤缺陷对火车的运行安全危害严重。

DAC lightweight aluminum poles with press fit connectors ensure durability and protection.

带有轻质铝极压接连接器，确保耐用性和保护。

It is a snug press fit into the gimbal mount and there is also a small thumb screw to make sure things stay in place.

这是一个温暖的压入万向支架和也有一个小的拇指螺丝，以确保事情留在原地。

Press fit buttons with other than centered round holes will use dowel locator for position or flat key. Dowel locators are preferred due to space requirements.

孔不在中心的压配合嵌套必须使用合销或扁平健固定其位置，因空间要求合销定位是首选。

The material choice, moulding method, joint principle and shape design of hinge joint, hasp joint, clamp joint and press fit joint of normal plastics were introduced.

介绍常用塑料铰链联接、搭扣联接、卡夹联接、压力装配联接的联接件材料选择、成型方法、联接原理、形状设计等。

Tolerances for press fits can become very critical because parts can be easily damaged by attempting to press fit them if there is an excessive difference in their mating dimensions.

对于压配合来说，对公差极为挑剔，因为如果结合件的配合尺寸相差过大的的话，那么在试图强行压配到 一块时极易将其损坏。

She was also helped by a fit of guilt in the press corps.

传媒对希拉里的一点内疚之情也帮助了她。

Widely used in parts of the press-fit shape, stretching, bending, punching, stamping, shaft alignment and press-fit etc.

广泛用于零部件的压装成型、拉伸、弯曲、打孔、压印，轴类零件的校正和压装等。

If the drive shaft wear mild, just press the old bush changed after standard size bushing, fit clearance can be restored to allow range.

若主动轴磨损轻微，只需压出旧衬套后换上标准尺寸的衬套，配合间隙便可恢复到允许范围。

Press-fit components avoid the need for screw placement, which carries the added risks of neurovascular injury and fretting wear between screw and shell.

假体压配式固定避免了螺钉的使用，因为其会导致血管神经损伤以及螺钉和臼杯磨损的风险。

Aim at the problem of that the four meter drill press is difficult to fit drill plate, this paper designs a special following drill plate.

针对四米数控钻床无法安装钻模的问题，专门为其设计了一种随动式钻模。

"We're having a bad spell," Sir Alex admitted to the press on Thursday morning. "Only a few weeks ago we had every defender fit and looking great."

“我们现在很艰难，”弗格森爵士周四承认。“几周前我们的后卫还都没问题。”

Widely used in parts of the press forming, stretching, bending, punching, stamping, shaft alignment and press-fit etc.

广泛用于零部件的压型、压弯、冲孔、压印， 及轴类零件的校正和压装等。

Size is expected to start from the calculation, cutting, straight seam welding, the whole round, press-fit, girth welding, leak detection, have a certain degree of technical difficulty.

从下料展开尺寸的计算、裁剪、直缝焊接、整圆、压装、环缝焊接、检漏等都有一定的技术难度。

Press-fit, jointing, torque and process control.

压接，焊接，扭矩和过程控制。

This paper introduces the technical requirements and quality analysis of the process of press-fit pin, proposed basic method for press-fit test.

文章介绍了插针压接工艺过程的技术要求及质量分析，提出了检验压接的基本方法。

In this paper, an infrared safety device is developed to fit the for - ging press mechanism. The device has the advantage of quick action, square light screen and breakdown self check.

本文研制设计了适合冲压机械的红外光安全装置，此装置具有动作速度快、矩形光幕、故障异或逻辑自检等优点。

The H9B series frame is used in ASHRAE built-up filter Banks with press-fit fasteners to facilitate the rapid replacement of air filters.

H 9 B系列框架使用在ASHRAE内置过滤器的压接紧固件中，促进空气过滤器的快速更换。

Dowels on both sides of connector lightly press-fit to board for temporary holding.

销的连接器上都轻轻压接边登上临时举行。

Widely used in parts of the press forming, stretching, bending, punching, stamping, shaft alignment press-fit. etc.

广泛用于零部件的压型、压弯、冲孔、压印，及轴类零件的校正和压装等。

From low cost, straight solder and press-fit terminations to high reliability connectors qualified to MIL-C-24308, many styles and options are available for light duty industrial applications.

符合MIL - C - 24308，低成本，直式焊接以及压接式高可靠性连接器。应用在众多轻型工业中。

Metal Clad Wipers are designed to press-fit into open face rod wiper glands, with no need for snap-rings, face plates, or other retention devices to hold the wiper in the gland.

金属骨架雨刷器的目的是开面棒压入雨刷腺体，配合无单元戒指，花盘，或其他设备需要保留腺体举行的雨刮器。