This area of study is called Computational Fluid Dynamics or CFD.

这方面的研究是所谓的计算流体动力学或计算流体力学。

Computational fluid dynamics is one filiation of the fluid dynamics.

计算流体力学是流体力学的一个分支。

Computational fluid dynamics was used to solve the problem in complex fluid by digital mode.

计算流体动力学是通过数字方式解决复杂的流体问题的一种研究方法。

In the text the internal flow of cross-flow fan is simulated with Computational Fluid Dynamics.

本文利用计算流体力学方法对空调器贯流风机系统内部气体流动进行了数值模拟；

Computational fluid Dynamics (CFD) is a kind of numerical simulation technology which studies fluid.

计算流体动力学(C FD)是一种以流体为研究对象的数值模拟技术。

Discrete Vortex Method (DVM) is a very important numerical approach in Computational Fluid Dynamics.

离散涡方法已成为计算流体力学中倍受人们青睐的一种数值方法。

In this way the system of computational fluid dynamics combined with physical analysis comes into being.

这样就形成与物理分析相结合的计算流体力学体系。

At the same time, use FLUENT computational fluid dynamics simulation software to optimize the structure of MAP reactor.

同时运用FLUENT计算流体力学模拟软件，模拟并优化了MAP反应器的结构。

The computational fluid dynamics model of a swirl nozzle is established with the water as the working fluid of atomization.

以水为流体介质，建立了旋流喷嘴的计算流体动力学模型。

This paper is an application of Computational Fluid Dynamics in the turbulent flow of three-dimensional air-conditioned room.

本论文应用计算流体力学的理论和方法模拟三维较复杂条件下空调房间室内空气流场的湍流流动。

Numerical wind tunnel technology based on computational fluid dynamics is an effective method for the study of the wind field.

数值风洞技术是以计算流体力学为基础进行风场研究的有效方法。

Only a few studies were carried out on the numerical simulation of mixing process by using computational fluid dynamics (CFD).

国内外采用计算流体力学（CFD）对混合时间进行理论研究的文献相对较少。

The possible benefits of the technique of computational fluid dynamics (CFD) used in car body flow-field analysis is highlighted.

探求了应用计算流体力学（CFD）研究汽车车身外部流场的可行性。

On the basis of computational fluid dynamics (CFD), adopting limited volume method, the external flow field of a car body is simulated.

以计算流体力学(CFD)为基础，采用有限容积法模拟计算了轿车车身的外部流场。

Combustion instability in a lean premixed combustor typically used in industrial gas turbines was studied with computational fluid dynamics technology.

对工业燃气轮机所使用的典型贫油预混燃烧室内的不稳定燃烧特性进行了数值研究。

The method for prediction the meter factor of the turbine flow meter by the computational fluid dynamics (CFD) software package (FLUENT) is put forward.

提出了利用计算流体力学(CFD)软件(FLUENT)进行涡轮流量传感器仪表系数预测的方法。

By taking common bend pipe in the project as an example, and using computational fluid dynamics (CFD) technology, the fluid state parameter was studied.

以工程中常见的弯管为例，应用计算流体力学(CFD)技术，研究管中的流体状态参数。

The commercial code of CFD (Computational Fluid Dynamics), FLUENT-5, has been used to numerically simulate the flow field in the draft-tube agitated tank.

利用计算流体力学软件FLUENT-5，对带导流筒搅拌槽内的流场进行了数值模拟。

In this paper, the technique of computational fluid dynamics (CFD) is adopted to simulate the air distribution of the dynamo floor and the hydraulic floor.

在此基础上，本论文利用CFD技术对西龙池地下水电站发电机层、水轮机层的气流组织进行了数值计算。

This paper is an application of Computational Fluid Dynamics in the turbulent flow of a three-dimensional air-conditioned room in which there are heat sources.

本文应用计算流体力学的理论和方法模拟了带内热源的三维空调房间室内气流的湍流流动。

Based on MIMD parallel computer model, parallel implementation of explicit finite difference methods has been discussed for computational fluid dynamics (CFD) problems.

基于MIMD并行计算机模型，本文讨论了CFD问题应用显式有限差分方法的并行化问题。

In order to adapt to new modern car styling, the aerodynamic numerical simulations based on computational fluid dynamics (CFD) are applied to the process of car styling.

结合作者进行的汽车造型概念设计，介绍了应用虚拟风洞进行汽车空气动力学数值模拟的研究过程。

A two-dimension model for the flow field in catalytic converter was established, and the steady state flow was simulated with the computational fluid dynamics (CFD) code.

利用计算流体动力学(CFD)软件，建立了催化转化器流场的二维模型，对催化转化器的稳态流动进行了数值模拟。

The research indicates that, the method of Computational Fluid Dynamics can calculate the drag coefficient of the irregular parts in air and flue gas ducts appropriately.

为计算电厂烟风道设计中常见异形件的阻力，采用计算流体动力学方法研究了典型异形件的阻力系数。

Making use of computational fluid dynamics method and dynamic simulation, the thesis studies the effects of jet flow on launch process of vehicular container-type missile.

结合流场计算和发射动力学仿真，研究某型车载发射系统中燃气流对发射过程的影响。

In this study, the computational fluid dynamics approach is employed to analyze the heat transfer for ball grid array package that is popular in modern electronic industry.

本研究以计算流体力学的方法，对电子构装产品的明日之星- - -球栅阵列封装方式，来进行详细的热传分析。