Applicable to high tensile strength metal grinding, such as general carbon steel, alloy steel, malleable iron hard bronze.

适用于中高抗张强度金属材料的磨削，如一般碳素钢，合金钢，可锻铸铁，硬青铜等。

Texture of material:The body and a box cover for malleable iron; screws made of 304 staintess steel; the gasket material for rubber.

材质：穿线盒体和盒盖为热浸锌可锻铸铁；螺丝材质为不锈钢304； 垫圈材质为橡胶。

Application: Drilling deep hole in non alloy steel, alloy steel, grey cast iron, malleable cast iron, special aluminum or magnesium alloy.

应用：适用于非合金钢、合金钢、灰口铸铁、球墨铸铁、可锻铸铁的深孔钻削，尤其适合铝合金和镁合金的加工。

The abrasive tools made of it are suitable for the grinding of car bon steel, malleable castiron, hard bronze, etc.

用其制造的磨具，适用于碳素钢、可锻铸铁、硬青铜等的磨削。

In contrast with east iron, steel is malleable and can be forged and rotted.

与铸铁相反，钢具有延展性，可以锻造和轧制。

The body and wedge are malleable iron. The cotter pin is stainess steel. The other parts are steel. All ferrous parts are hot-dipgalvaized.

线夹的本体和楔子为可锻铸铁，热镀锌。其余为热镀锌钢制件。

Traction frame from a special aluminum alloy Liuleng tube (with rebar) and high-pressure malleable aluminum fastening combination of stainless steel or aluminum rails;

牵引架由特制铝合金六棱管（内有加强筋）和高压锻铸铝合金扣件组合；

Because of the restrictions due to bearing its own steel, small manufacturers and shoddy imported bearings bearing most of the use of ordinary steel, carbon steel, malleable iron.

因为由于轴承自身钢质的限制，小的轴承厂家和伪劣的进口轴承大多使用普通钢材、碳钢、玛钢。

Rolled, forged, or cast steel, or malleable iron fittings may be used. Cast iron is not permissible for fittings.

可以使用轧制钢、铸钢或坩埚钢、或者铸铁装置，不允许用生铁。

The body and wedge are malleable iron, the other parts are steel, all ferrous parts are hot-dip galvanized.

线夹的本体和楔子为可锻铸铁，热镀锌。其余为热镀锌钢制件。

The clamp body and keepers are malleable iron, cotter-pins are stainless steel, the other parts are steel . All ferrous parts are hot-dip galvanized.

线夹本体和压板为可锻铸铁件，闭口销为不锈钢制件，其余为钢制件、可锻铸铁件和钢制件热镀锌。

Mobile jaw drip-forged with high quality carbon steel, inactivate treatment, malleable cast iron handle and drip.

钳口采用优质碳钢锻造，钝化处理，可锻铸铁柄柄部占塑！

The clamp body and keepers are malleable iron, cotter-pins are stainless steel, the other parts are steel. All ferrous parts are hot-dip galvanized.

线夹本体和压板可锻铸铁件，闭口销为不锈钢制件，其余为钢制件、可锻铸铁件和钢制件热镀锌。

The clamp body and keepers malleable iron, cotter-pins are stainless steel, the other parts are steel. All ferrous parts are hot-dip galvanized.

线夹和压板为铝合金制件，闭口销为不锈钢制件，其余为热镀锌钢制件。

You can specify Spring Retainers made of Steel, Stainless Steel, Aluminum, Copper, Brass and other malleable metals.

您能指定弹簧护圈使用钢铁、不锈钢、铝、铜、黄铜和其它可锻金属来制造。