The methods for lightwave phase demodulation are discussed.

最后探讨了光相位解调方法。

A temperature control module for planar lightwave circuit (PLC) is introduced.

研制了一种用于平面光波导(plc)的控温模块。

Bent waveguide is an indispensable unit of structure used in PLC (Planar Lightwave Circuit).

弯曲波导是平面光波导器件中不可缺少的结构单元。

Kinds of optical modulation sensors, especially lightwave phase modulation sensors are studied.

系统研究了各种光波调制传感器，重点研究了光相位调制传感器。

Results show that the medium disorder plays an important role in determining the lightwave state.

结果表明：介质无序度对决定光场状态起着重要的作用。

Merging of lightwave with microwave gives an impetus to the re-search on new principles and new devices.

光波与微波的结合，推进了新原理、新器件的研究。

Tod Grimes does a great job at showing some fair work habbits in Lightwave and covering the animation workflow.

托德格兰姆斯在显示一些公平的工作民政事务局位在光波和覆盖的动画工作流程做了了不起的工作。

Intermediate knowledge of Lightwave as well as basic knowledge of After Effects are required to complete this tutorial.

光波中级知识以及对基本知识后，必须完成本教程。

The plan of system unit composed of three levels, which are lightwave level, microwave level and TV level, is described.

给出了由光波层、微波层、电视层共三个层次组成的系统单元的方案。

The invention discloses a lightwave stove which comprises a stove body that adopts a light-emitting diode as a heat source.

本发明公开了一种光波炉，包括炉体，炉体采用发光二极管为热源。

Then we take the character and professionally model, texture, rig, animate and work a little LightWave 3d magic with dynamics.

然后，我们采取的性质和专业模型，纹理，钻机，动画和工作有点光波魔术与三维动态。

Focusing on Texturing, Shading, Lighting, Rendering, and grading, this is a valuable resource for any lightwave character modeler.

在纹理，阴影，照明，渲染，和等级为重点，这是任何光波字符建模宝贵的资源。

The overlap integral between lightwave and microwave were calculated. Performances of devices with two kinds of electrodes were compared.

文中对反映光波与微波相互作用强度的重叠积分进行了详细计算，并对器件性能的改变进行了比较。

The merging techniques of microwave and optical fiber will rely on researching of the interaction technologies of the lightwave and microwave.

微波技术与光纤技术的综合应用将在很大程度上取决于微波和光波相互作用技术的研究。

The coupling characteristics of tapered and lensed fiber (TLF) and semiconductor MQW planar lightwave circuit (PLC) chip was investigated experimentally.

对锥形透镜光纤(TLF)与半导体多量子阱(MQW)平面光波光路(PLC)芯片的耦合特性进行了实验研究。

This paper, on the viewpoint of Lorentz transformation of wavelength of lightwave, derives the frequency equation of Doppler effect of light with tow methods.

本文从光波波长的洛仑兹变换出发用两种方法导出了光的多普勒效应的频率公式。

The Hamiltonian solution of two-level atoms interaction with sounding lightwave field is given by using a new method of LLP transformation in solid state physics.

首次将团体理论中的LLP变换用于处理两能级原子与驻波场相互作用体系的全量子哈密顿量。

The paper outlines the technical talks presented in the workshop on Lightwave, Wireless & Networking Technologies, held in the Chinese University of Hongkong recently.

本文记述香港中文大学最近举办“光波、无线和组网技术”研讨会的学术报告大致情况。

Silicon-on-Insulator (SOI), boasting good optical, electronic and mechanical properties, is one of the common materials of Integrated Planar-Lightwave-Circuits (PLCs).

绝缘体上的硅（SOI）材料是制作平面光波导器件的一种主要材料，具有良好的光学、电学和机械特性。

In this paper, a high-sensitivity lightwave communication system is set up by using a mini-power near-infrared LED as a light emitter, a phototransistor as a photoelectric receiver.

本文采用小功率红外发光管作光源，用光敏二级管作光接收器件，建立了高灵敏度的光波通信系统。

He began using LightWave 3D in its early days for TV commercials and other projects at a CGI company he co-founded during the early '90s called The Animation Factory in Albuquerque.

他开始用光波三维初期电视广告及其他项目，他的CGI公司共同创办在90年代初，所谓的动画厂阿尔伯克基。

An general analysis for front end performance of turned optical receiver for microwave subcarrier multiplexed lightwave system was presented. Formulas for front end circuits were deduced.

采用综合的分析方法从理论上分析了适合于微波副载波传输的谐振式光接收机前端的特性，提出了一整套计算公式。

In this case the information source provides an electrical signal to a transmitter comprising an electrical stage which drives an optical source to give modulation of the lightwave carrier.

在这种情况下，信源给发射机提供一个电信号，发射机中的电路驱动光源以实现对光载波的调制。

The basic model of planar waveguide gratings in reconfigurable optical add-drop multiplexer (ROADM) is presented. The characterization of the materials used in planar lightwave circuit is discussed.

建立了用于可重构上下路复用器(ROADM)中的平面波导光栅的基本模型，讨论了目前制备平面波导器件的主要材料及其特性。