The best material be used for Lead wire cutters.

电子线路板用切脚刀首选！

The price of the lead wire cage net of this material is relatively low.

这种材质的铅丝笼网价格相对较低。

It used a lead wire weight at tip. On surface is white PVC Shrink Tubing.

翼尖有铅条配重，表面蒙乳白色热缩膜。

About coil lead wire raise up range, it is limited as a part of lead wire diameter.

关于线圈引线提高的范围，它是有限的导线直径的一部分。

This article conducts a research on the weldability of crystal diode lead wire luminous electrotinning.

本文对晶体二极管引线光亮电镀锡的可焊性进行了研究。

Neon lamps can be supplied as customers specifications. Lead wire may be tin or silver plated on request.

氖灯可根据客户要求定制，氖灯引出线可选择镀银或镀锡。

High rated current for High current circuits. Designed by special lead wire to prevent open circuit failure.

高定格电流以适为高电流电路板。设计特殊导针来预防开路。

Boxes can be supplied factory prewired with high temperature lead wire protected with armor cable or wire braid.

接线盒可在工厂预先配有高温引线，引线由铠装电缆或金属编织来保护。

The price of the lead wire cage net of this material is relatively moderate, use the hot dipped zinc stone cage.

这种材质的铅丝笼网价格相对比较适中，使用较热镀普锌石笼多。

Please do not touch the blade with the push and never bring the fan with lead wire, the bearing and lead wire may be damaged.

请勿触压着叶片以及电源线绕着风扇或用力拉扯电源线，如此轴心与电源线将会被损坏。

Using a short length of servo lead wire with the brown (or black) lead removed, connect S1 to the holes marked S1 on the board.

使用短长度的伺服引线与布朗（或黑色）带头拆掉，连接中一至洞，标志着中一对董事会。

The length of lead wire of the temperature sensor shall depend on location of the senor as provided in the corresponding data sheet.

温度传感器引线的长度应根据相应的数据单中提供的传感器安装位置来确定。

The lead wire for loudspeaker coil is suitable for the lead wires of loudspeaker coil, electronic equipment or apparatus and components.

扬声器音圈接线是用于扬声器音圈和电子电器设备或元件的接线。

The technology reduces contacting resistance of the lead wire joint of the cold-light bulb and prolongs service life the cold-light bulb.

本技术方案降低了冷光源灯泡引线接头的接触电阻，延长了冷光源灯泡的使用寿命。

Based on a 3 wire platinum resistor measuring circuit, in which the lead wire resistance can be compensated, a high precise temperature measuring method is stated.

基于可补偿引线电阻影响的三线制铂电阻测量电路提出了一种高精度测温方法。

The stator lead wire of QD115 starter and the lug can be welded without flux filled, which avoids the phenomenon of strands of thin wires getting hard after welding.

解决了QD 115定子引出线与接线片和电器产品电源线与接线片不加填充焊料的焊接问题，避免了多股细铜线焊后变硬的现象。

Connection heads provide a protected, clean area for mounting a terminal block or transmitter as part of the transition from temperature sensor assembly to lead wire.

连接头为终端嵌块或者发射机提供一个受保护的、洁净的区域，从温度感应器到引线。

Under special circumstance, it is required that the sensor, protective layer of lead wire and the variable conveyor casing shall be electrically insulated from the ground.

在特殊情况下，要求传感器、引线的保护层与变送器外壳及地保持电气绝缘。

Since it is a lead wire type device. it can be attached to printed circuit boards. the relay terminal boards. etc. ; it has a space saving shape; and it is highly economical.

由于采用了引脚结构，电源防雷模块可以直接焊于印刷电路板上、接在继电器等接线端子上，从而节省安装空间， 经济适用。

The lead wire parts multi-position progressive die is introduced, the method of multi-units strip material cutting off is stated, and a novel guide pin structure is introduced.

介绍了引线角多工位级进模，叙述了多单元条料的切断方法，及以一种新颖的导料钉结构。

This products select quality galvanized lead wire, through automation, precision wove, also using metal plates stretching, punching, it is used in the microphone audio equipment.

该产品选用优质镀锌铅丝，通过自动化、精密准确编织制成，亦有采用金属板拉伸、冲孔而成，用于做麦克风网、音响设备。

The temperature sensors, start switch S1, and current control potentiometer are all connected to the board using servo lead wire (available at many hobby shops in 10 foot lengths).

温度传感器，启动开关s1的，和电流控制电位器都连接到局用伺服引线(可在许多商店的嗜好，在10英尺长度)。

The lead wire and its protective layer of the sensor shall be of one-piece construction, and its connection with variable conveying module shall subject to the Manufacturer's standards.

传感器引线及其保护层应为一体化结构，与变送器模块的连接应采用厂家提供的标准。

The conductive loop partial overheat fault caused by improper design and installation of the through lead wire in transformer bushing is analyzed. The preventive measures are presented.

分析了因变压器套管穿芯引线设计及安装不合理导致的导电回路局部过热性故障，提出了防范措施。

A lead wire adapter fastens to the external snap that penetrates the neoprene and conductive material to deliver the output from electrical stimulation devices, such as tens, HVPC, or NMES.

导线适配器固定在外面的按钮上，透过合成橡胶和传导材料，从电刺激设备中传出输出功率，设备有TENS, HVPC或NMES。

If a conductive wire is run between the two, electrons released by the lead will run through it towards the lead dioxide, generating an electrical current as they do so.

如果把一根导电金属丝放在金属铅和二氧化铅之间，铅释放的电子会经金属丝传递到二氧化铅，这个过程会产生电流。

Disconnect the other wire from the bulb holder , and clip the loose end to the lead of the pencil.

将另外那条电线连接灯泡底座那端移开，然后夹到铅笔的「铅」上。